it will be within 30 days after confirm the order.
This series of equipment sterilization rule out the use of multiple indoor air into the steam vacuum pulse vacuum several ways to make indoor air exclusion amounted to more than 99%, thus ensuring uniformity of temperature throughout the room up to 0.5 °C, to ensure reliable bactericidal effect.
-Within the main shell material is 06Cr19Ni10 stainless steel, the inner surface by mechanical polishing and electropolishing process, not only beautiful, but also greatly enhanced corrosion resistance. Full compliance with the main design and production "GB150 steel pressure vessel" and "Fixed Pressure Vessel Safety specifications" requirement. This series of sterilizer chamber volume are: 240L, 360L, 400L, 600L, 800L, 1000L, 1200L, 1500L.
-door material inside the 06Cr19Ni10, external ribs to Q235B, all outside the insulation coating, to minimize heat radiation. Lift the door with nuts and other motor driven screw drive mechanism to complete; use compressed air to the pressure of tight silicone seal on the door, not seal reliably, compared with the manual door operation can greatly reduce the labor intensity. The sterilizer has single-and double-Fei (single door and double doors) of the points, double-Fei sterilizer seal the front and rear doors can be single action, that is, only a single front door open when the seal; when the back door seal can separate the front door open, so that there is bacteria isolated areas and sterile areas to effectively meet the national drug GMP production management and hospital CSSD specifications.
-7-inch 65k color-color touch screen controls as man-machine interface, can be dynamically displayed in the working of the process temperature, pressure, time and other parameters can be printed with your records.
-With imports of programmable logic controller (referred to as the PLC or PC) for process control, functional, high reliability, flexibility and so on.
1.Rated working pressure: 0.21MPa; rated operating temperature: 134 °C;
2.Set the pulse frequency range of 0 - 99;
3.Sterilization time setting range: 0 to 9999 seconds (2 hours 46 minutes 39 seconds);
4. Drying time setting range: 0 to 9999 seconds (2 hours 46 minutes 39 seconds);